Filter
Top Products
Tilt Adjustment
View B illustrates the location of the Tilt Up and Tilt Down Limit Adjustments. With the camera
mounted on the pan & tilt as shown in Figure 3, turn the system power “ON” and move the
JOYSTICK up until the rear of the camera nears the bottom of the pan & tilt. Make sure the
camera does not hit the pan & tilt when tilted fully up. If it does, DAMAGE COULD BE
CAUSED TO THE SERVO MOTORS IN THE PAN &
TILT HEAD OR TO THE CAMERA/LENS
ASSEMBLY. If the camera rear does hit the pan & tilt
head when fully positioned upward, readjust the “Tilt
Limit Switch Adjustment” until the camera rear does not
touch the pan & tilt head.
Move the JOYSTICK down until the front of the camera
nears the bottom of the pan & tilt. Make sure the camera
does not hit the pan & tilt when tilted fully down. IF IT
DOES, DAMAGE COULD BE CAUSED TO THE
SERVO MOTORS IN THE PAN & TILT HEAD OR TO
THE CAMERA/LENS ASSEMBLY. If the camera front
does hit the pan & tilt head when fully positioned
downward, readjust the “Tilt Limit Switch Adjustment” until the camera front does not touch the
pan & tilt head.
+
-
+
-
Tilt Limit
Switch
Adjustment
Video Output
VIEW B
Video from
Camera
2/12/05 Document D0153
9