Filter
Top Products
20
WIDE MODE
ZOOM
DIS
GA I N UP
TO FADER / W IPE MENU
TO P .AE / EFFECT MENU
TO DATE / TIME MENU
TO SYSTEM MENU
END
OFF
20X
OFF
AGC
ITEM ZOOM SW .
SET SET BUTTON
A
DIS (Digital Image Stabilizer)
When recording while holding the camcorder in
your hand, or when shooting a subject with llittle or
no contrast, subtle hand movements will cause
shakiness in the recorded image.
ON–Compensates for relatively small shakes that
occur when shooting close up. “ ” appears in the
viewfinder during recording. *This function is
usable when the Select Dial is set to “MANUAL”.
OFF–When shooting with the camcorder in a fixed
position or on a tripod, set the Stabilizer to “OFF”.
If you leave it on and then move or turn the camera
to follow a moving subject, unnecessary
compensation occurs and this can result in an
unnatural recorded image.
NOTES:
●
The Stabilizer cannot compensate for drastic hand
movements while shooting.
●
The Stabilizer will not work when certain
P.AE/ Effects (Classic Film, Strobe, Slow 1, 2
(
੬
pg. 37) and Fade/Wipe Effects (Picture Wipe/
Dissolve (
੬
pg. 33) are activated.
The “ ” indicator appears blinking in the
viewfinder.
Zoom Magnification
You can select 10x, 20x, or 100x zoom
magnifications.
10x–Optical zoom that does not degrade the quality
of the recording.
20x–Electronic processing (Digital zoom) that lets
you get closer up.
100x–Electronically-processed images at 100-times
magnification.
Gain Up
Bright, natural recordings can be taken even in
areas with low or poor lighting.
A
–The shutter speed is automatically adjusted (1/
30 — 1/200 sec.). Shooting a subject in low or poor
lighting at 1/30 sec. shutter speed provides a
brighter image than in the AGC mode, but the
subject’s movements are not smooth or natural.
OFF–Select this setting when lighting is not a
problem.
AGC–This is the factory setting, and is automatically
activated during Auto operation. The overall
appearance is jagged, but the image is bright and
the movements are more natural than in “
A
”
mode.
Wide Mode
This recording mode is compatible with
wide-screen TVs (16:9 aspect ratio). When using
this mode, please refer to your wide-screen TV’s
instruction manual.
SQUEEZE–For playback on TVs with an aspect ratio
of 16:9. Naturally expands the image to fit the
screen without distortion. appears in the
viewfinder.
CINEMA–Inserts black bands at the top and bottom
of the screen. Works with both 4:3 and 16:9 TVs.
Used with the Sepia (੬ pg. 37) or Monotone
(੬ pg. 37) modes, it gives the recorded scenes the
look of a classic movie.
OFF–Select “OFF” when you don’t want to use
either of the above modes (first set the Select Dial to
“MANUAL”). *During Full-Auto operation, both
Squeeze and Cinema modes are unusable.
A discriminating signal is automatically recorded
when you select either “SQUEEZE” or “CINEMA”
for recording. If your wide TV has the automatic
discriminating function, connect an S-Video cable
between connector S1 or S2 on the TV and the
S-Video output connector on the Docking Station.
During playback, the images is naturally expanded
to fit the wide screen, with no proportional
distortion.
NOTES:
●
When playing back through a video cassette recorder, or
to a wide-screen TV, that doesn’t have the automatic
discriminating function, change the setting on the TV
manually.
●
When recording using the Squeeze, the image in the
viewfinder, as well as on a regular TV (if connected for
playback) will be the standard aspect ratio and the
picture will appear squeezed.
●
When playing back a tape recorded in Squeeze and
Cinema, Squeeze cannot be distinguished from Cinema
during fast-forward or rewind.
10X
20X
100X
OFF
SQUEEZE
CINEMA
OFF
OFF
ON
AGC
RECORDING (Cont.)