47
OFF
5S
REC
PLAY
PLAY
/PAUSE
REW
RE SHOOT
You can watch what you’ve recorded in the viewfinder.
NOTES:
●
You can also perform a High-Speed Search by
pressing and holding REW or FF during the PLAY
mode. The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
●
A slight mosaic effect appears on screen during
High-Speed Search. This is not a malfunction.
●
The sound is not available during High-Speed
Search.
Still Playback
To temporarily stop playback, press PAUSE. Press
again to resume playback. If still playback
continues for more than about 3 minutes, the
camcorder’s Stop mode is automatically engaged.
After 5 minutes in the stop mode, the camcorder’s
power is automatically turned off.
1
SELECT MODE
Pull out the viewfinder and set the Power Dial
to “PLAY”.
2
OPEN COVER
Slide the camcorder’s Operation Panel cover
as shown in the illustration.
3
REWIND TAPE
Press REW. If you rewind all the way to the end
of the tape, it stops automatically.
4
WATCH RECORDING
Press PLAY. You can watch the recording in the
viewfinder.
3
5
END PLAYBACK
Press STOP and set the Power Dial to “OFF”.
To Perform High-Speed Search . . .
..... press REW or FF after pressing PLAY. The tape
will move at approximately 9 times the normal
playback speed. Watch in the viewfinder and,
when you reach the spot you want to see, press
PLAY and normal playback resumes.
POWER DIAL
PLAYBACK
Basic Playback
POWER
LAMP
OPERATION PANEL
COVER