Filter
Top Products
92
Camera Features
Applicable to: Camera mode
Restoring the SDHC/SDXC Card
It is necessary to restore the SDHC/SDXC card if an
abnormality occurs to the data in the card due to some
reasons.
A A! RESTOREB message appears at the remaining media
display area when an SDHC/SDXC card that requires
restoring is inserted.
Memo :
● The message ARestore MediaB appears on the LCD
monitor/viewfinder screen when an SDHC/SDXC card
that requires restoring is inserted while the thumbnail
screen is displayed. To cancel the message display, press
the center of the set lever.
1
Select [Restore Media] in the [Media] menu. (
A
Page 75)
2 Select the SDHC/SDXC card to be restored and press
the center of the set lever.
3 Restoring starts.
4 Restoring is complete.
●
When restoring is complete,
A
Complete
B
appears and the
camera recorder returns to the [Restore Media] screen.
●
When no media that requires restoring is inserted, the
camera recorder returns to the [Media] menu screen.
Note :
●
[Restore Media] can only be selected in Camera mode.
However, it cannot be selected while the camera recorder is
recording. Select [Restore Media] in Camera mode when the
camera recorder is not recording.
●
[Restore Media] does not restore the SDHC/SDXC card to
its original states completely. If restoring fails, replace or
format the SDHC/SDXC card. Take note that formatting the
SDHC/SDXC card erases all information inside.
Memo :
●
Restoring cannot be performed in the following cases.
• SDHC/SDXC card is not inserted.
• Write-protect switch of the SDHC/SDXC card is set (
is displayed).
• Restoring is not required.
Restoring the SDHC/SDXC
Card
2
GY-HM150U.book Page 92 Monday, September 5, 2011 1:48 AM