Filter
Top Products
13
S [MONITOR] Monitor terminal (RCA pin)
(A Pg. 28)
T Heater power connector
This power connector is used when the camera
is installed with a heater (sold separately: KA-
ZH215).
U Heater space
Memo：
● When mounting the heater (sold separately
:KA-ZH215), read the instruction manual of
the heater carefully before mounting.
V Camera unit
W Camera Fastening Claw ן2
This claw fastens the camera unit to the base. To
remove the base, push it towards the direction of
the arrow and remove. (A Pg. 17)
X [MAC address] MAC address indicator
The MAC address is a unique physical address
of the product. This address cannot be altered.
Y Tilt fastening screw
After adjusting the field angle, tighten the screw
so that the camera field angle will not be
misaligned when using the camera in locations
with vigorous vibrations. (A Pg. 28)
Z Imaging Direction mark
Install the camera facing the arrow in the
shooting direction.
a Lug plate
This plate fastens the silica gel.
(A Pg. 20)
b Silica gel insertion space
(A Pg. 20)
Lens section
c
[FOCUS ADJ] Focus adjustment button
This is used to adjust the lens focus.
Press the button to open the lens iris for 30
seconds. The focus is now easier to adjust as
the depth of field becomes shallow. (A Pg. 29)
Memo：
●
Pressing the focus adjustment button
automatically activates the electronic shutter. The
screen may flicker but this is not a malfunction.
d [IRIS LEVEL] Iris level adjustment dial
This dial adjusts the iris level of the auto iris lens.
Normally, adjustment is not required. Adjust if
required, depending on the conditions of the object.
To darken: Anti-clockwise direction (towards L)
To brighten: Clockwise direction (towards H)
Memo：
●
Adjust the iris level after [AGC] is set to
A
Off
B
.
For
A
AGC function settings
B
, please refer to
the [INSTRUCTIONS](pdf) in the supplied CD-
ROM.
● If AOffB is not set, turning the dial towards L
will activate the AGC function. The camera
sensitivity increases and the image quality
becomes grainy.
e Focus adjustment ring
Move the ring to the left and right to adjust the focus.
(
A
Pg. 29)
f Zoom adjustment ring
Move the ring to the left and right to adjust the field angle.
(
A
Pg. 29)
H
L
IRIS
LEVEL
FOCUSADJ
FORSERVICE
IRISADJ
SPOT
c
d
f
e
VN-C215VP_EN.book Page 13 Wednesday, December 20, 2006 4:26 PM