Filter
Top Products
20
Setup
4.Insert the supplied silica gel
Take out the silica gel from its aluminum pack,
insert it in the space for silica gel inside the
camera and secure with a lug plate.
Memo：
● Be sure to replace the silica gel when you
reconnect or reinstall the camera during
repair or maintenance.
● For replacement, please consult your nearby
JVC’s dealer.
Use silica gel of service parts number
LW40500-001A for the parts to be replaced.
Note：
● Pay attention that rain does not seep into the
camera when mounting it during rainy days.
● Be sure to use the supplied silica gel. Failure
to do so may fog up the camera lens or dome
cover.
● If the field angle is not adjusted immediately
after mounting the camera, insert the silica
gel after adjustment. The silica gel will lose its
effect if it is exposed to air for a long time.
Mounting the camera
(continued)
Space for inserting
silica gel
Silica gel
Lug plate
VN-C215VP_EN.book Page 20 Wednesday, December 20, 2006 4:26 PM