Filter
Top Products
21
Mount the base to an electrical box.
1.Remove the camera unit from the base
(A Pg. 17)
2.Mount the base to the electrical box
Use two mounting holes and two M4 screws to
mount the base to the electrical box.
Memo：
● M4 screws are not supplied.
3.The following procedures are the same as
normal mounting
● Cable connection (A Pg. 18)
● Mounting the camera to the base
(A Pg. 19)
● Image adjustment (A Pg. 28)
●
Mounting the inner dome (
A
Pg. 30)
● Mounting the dome cover (A Pg. 30)
Mounting the camera via
electrical box
4 inch square electrical box
M4 screw (not supplied)
VN-C215VP_EN.book Page 21 Wednesday, December 20, 2006 4:26 PM