9-10
Using the SB-28D Speedlight
.
1 Turn the camera on.
2 Turn the Speedlight on by
pressing its ON/OFF button for
approximately 0.5 seconds.
The Speedlight’s Ready light
comes on as soon as the flash is
recycled and ready to fire.
☛ If your subject is relatively far
off, wait several seconds after
the Ready light turns on before
capturing the image.
3 Aim the camera at the subject.
4 Press the Shutter Release button
to capture the image.
☛ If the Ready lights on the
Speedlight and inside the
camera viewfinder blink for
approximately 3 seconds after
you capture the image, the
light may be insufficient for
correct exposure. If this
occurs, use a wider aperture or
move closer to the subject
before capturing any more
images.
5 Wait for a few seconds until the
Ready light comes on again
indicating that the flash is ready.
Capture a few more images,
changing exposure
compensation on the flash or on
the camera, as needed.
SELMODEZOOM
ISO
ZOOM
mm
m
181396431.510.6 0.8 2
FLASH
ON / OFF
A
STBY
