Filter
Top Products
INSERT
PHOTO
HERE
4
Configuring
4-1
Configuring Your
Camera
4
This section describes how to change various settings on KODAK PROFESSIONAL
DCS 700 Series Digital Cameras.
Date and Time
You can set the date and time on your camera. The date and time is associated with each
image captured. The format for the date is year/month/day, and the format for time is
hour:minute:second based on a twenty-four-hour clock.
The setting is maintained when you turn the camera off, after PowerSave, or when you
remove the battery for a few days.
☛ There is a small rechargeable battery in the camera which can lose its charge if you
remove the main battery for a long period of time. When you insert the main battery,
the small battery is recharged, but you need to reset the date and time.
1 Highlight the Menu icon, then
choose Main Menu from the
dropdown menu.
2 Choose Date/Time from the
Main menu.
The Date/Time screen appears.
There are six fields: year, month,
day, and hour, minutes, seconds.
3 Press the left or right side of the
Four-way switch to sequence
through the numeric fields.
4 Press the top or bottom of the
Four-way switch to change the
highlighted numeric value.
5 Press the OK or Cancel button.