6-6
Loading White Balance Settings
You can load White Balance settings from a PC Card into your camera. (The settings are
saved to the card using the DCS Host software.)
1 With the Custom WB Menu
displayed, choose Load from
Card.
The Load White Balance Setting
screen appears with a list of the
White Balance settings on the
active PC Card. (If only one
card is in the camera, the card
choices do not appear.)
2 Choose the desired card. (You
may need to scroll up to the card
choices if there are numerous
White Balance settings.)
3 Repeat step 2 to choose the
desired Custom White Balance
setting.
4 Press the OK button.
Barring conditions described on
the next page, the setting is
loaded from the PC Card to your
camera.
☛ The last setting loaded
becomes the active White
Balance setting.
