Filter
Top Products
11-36
14 Center-Weighted Metering:
In Center-Weighted Metering, 75% of the
meter’s sensitivity is concentrated in the
12 mm-diameter circle within the viewfinder
and 25% of the sensitivity is outside this circle.
To change the size of the circle to 8 mm,
12 mm, 15 mm, 20 mm diameter, or to the
average of the entire viewfinder, select C 8, C
15, C 15, C 20, or A.
Default: 75%
concentration in
12 mm diameter
area
14-0
75%
concentration in 8
mm, 12 mm, 15
mm, 20 mm
diameter area.
C8,
C12,
C15,
C20, A
15 Time delay for auto meter-switch-off:
The camera meter remains on approximately 8
seconds after the Shutter Release button is
pressed. To change the delay time to 4, 16, or 32
seconds, select L 4, L 8, L 16 or L 32.
Default: 8
seconds
15-0
4, 8, 16, 32
seconds
L4, L8,
L16,
L32
16 Self-timer duration:
At the default setting, the shutter is released 10
seconds after the Shutter Release button is fully
depressed. To change the delay time to 2 to 60
seconds in one second steps, select L 2, L 3,
L 4, … or L60.
Default: 10
seconds
16-0
2 to 60 seconds L2, L3,
L4, …,
L60
17 Bracketing in Manual Exposure mode:
At the default setting, the shutter speed shifts
with each image captured when bracketing is
performed. To change the shifting factor to a
shutter speed/aperture combination, shutter
speed, aperture, or flash output level
respectively, select 11A, 10A, 01A, or 00A.
Default: shifts
shutter speed
17-0
Shifts shutter
speed/aperture
combination,
shutter speed,
aperture, or flash
output level
11A,
10A,
01A,
00A
18 Focusing screen compensation:
To change the EV level of the focusing screens
C, F, G1-G4 or U to –2.0 to +2.0 in 0.5EV steps,
select -2.0, -1.5, -1.0, -0.5, 0, 0.5, 1.0, 1.5 or 2.0.
See the instruction manual for the focusing
screen for the required compensation value.
018-0
-2.0 to +2.0 in
0.5EV steps
-2.0, -
1.5, -
1.0, …,
2.0
Number Function Your Option LCD