Filter
Top Products
4-3
4
Configuring
Battery Save Onset
When your camera is powered by battery, it enters Battery Save state if you do not touch
any controls for the Battery Save Onset time. You can change the onset time from
01:00:00 to 23:59:59 (HH:MM:SS). The default onset time is 60 minutes.
1 Display the Properties menu.
2 Choose Battery Save Onset from the Properties menu.
The Battery Save Onset screen appears.
3 Press the left or right side of the Four-way switch to sequence through the numeric
fields.
4 Press the top or bottom of the Four-way switch to change the highlighted numeric
value.
5 Press the OK or Cancel button.
Display Off Time
Extended use of the Image LCD can drain your battery. For this reason, the LCD turns off
after the length of time specified in the Display Off Time property. The default Display
Off Time is 60 seconds.
1 Choose Display Off Time from the Properties menu.
The Display Off Time screen appears.
2 Press the left or right side of the Four-way switch to sequence through the numeric
fields.
3 Press the top or bottom of the Four-way switch to change the highlighted numeric
value.
4 Press the OK or Cancel button.