Filter
Top Products
66
Installing the Software
While the Installer is automatically loading your software, take a few minutes to
fill out and send in the camera product registration card. This allows you to
receive information regarding software updates and registers some of the
products included with the camera.
1 Close all other software programs before starting the Installer.
2 Place the Installer CD into the CD-ROM drive.
3 Load the software.
On a WINDOWS-based computer—if Auto Play is enabled, the first
install window automatically appears. If the first install window does not
automatically appear, choose Run from the Start menu. In the Run dialog
box, type the drive letter that contains the CD and type \setup.exe. For
example: d:\setup.exe
On a MACINTOSH computer—double-click the Installer icon.
4 Follow the on-screen instructions to install the software.
5 If prompted, restart the computer when the software installation
is complete.
You are now ready to use Digital Camera software. For more detailed
information, refer to the online help.