Filter
Top Products
30
Adjusting the Exposure Compensation
Use the Exposure Compensation dial to control how much light is allowed into
the camera. You can adjust the exposure by plus or minus 2 stops in 1/2-stop
increments. The Exposure Compensation dial is located on top of the camera.
This optional feature is available in fully automatic (page 16) or Aperture
Priority mode (page 19). It is not available in Manual mode (page 17).
NOTE: This setting is ideal for controlling scenes in which the light
source is behind the subject (backlit), or for correcting pictures that
are too light or too dark.
Turn the Exposure Compensation dial to the
exposure value you want to use.
If your pictures are too light, decrease (-)
the exposure compensation value.
If your pictures are too dark, increase (+)
the exposure compensation value.
8
5
6