Filter
Top Products
8
79
Camera
Problem Cause Solution
Picture is too light. The flash is not
needed.
Change to Auto flash. See
page 25.
The subject is too
close when the
flash was used.
Move so there is at least 1.6 ft
(0.5 m) between the camera
and the subject.
The light sensor is
covered.
Hold the camera so your hands
or other objects do not cover
the light sensor.
The Exposure
Compensation is
set incorrectly.
Decrease the Exposure
Compensation. See page 30.
Stored pictures are
damaged.
The Picture Card
was removed when
the Picture Card
access light was
blinking.
Make sure the Picture Card
access light is not blinking
before removing the card.
Pictures remaining
number does not
decrease after taking a
picture.
Image Resolution
and Quality settings
do not take up
sufficient space to
decrease the
picture remaining
number.
The camera is operating
normally. Continue taking
pictures.