Filter
Top Products
68
Using a USB Cable Connection
Follow the directions below to connect your camera to your computer
(WINDOWS 98 or 2000-based or MACINTOSH) using the USB cable provided
with your camera.
When connecting the camera and downloading pictures, the battery is drained
at a fast rate, so use the AC adapter when possible.
1 Plug the appropriate end of the USB cable
into the port on your computer marked
with the USB symbol.
If the port is not labeled, see your
computer User’s Guide for a diagram that
illustrates all of the external ports.
2 Open the door on the side of the camera.
3 Plug the other end of the USB cable into the
camera USB port.
4 Turn on the camera.
On a WINDOWS-based computer, a window appears showing the contents
of the Picture Card.
On a MACINTOSH computer, a camera icon appears on the desktop.
If a message is displayed on your computer stating that you are not
connected, refer to the PDF document installed with the software
(USB.PDF for PC or Connect.PDF for MACINTOSH), or the online help for
troubleshooting information.
To access the pictures on your Picture Card, see “Starting KODAK Digital
Camera Software” on page 69.