Filter
Top Products
31 www.kodak.com/go/support
Doing more with your camera
1 Set the Drive mode to the desired option, page 30.
2 Press the Shutter button halfway to set the AE/AF.
3 For all settings, except Burst, press the Shutter button completely down and
release it to take the picture.
For Burst settings, press the Shutter button completely down
and hold it. The camera stops taking pictures when you release the Shutter
button, all pictures are taken, or there is no more storage space.
NOTE: To cancel self-timer and shutter delay during countdown, press the Shutter button again.
NOTE: During quickview you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 17).
Last Burst
Flash forced off.
Camera takes a series of pictures while the Shutter button is
pressed. When the Shutter button is released, only the last
6 pictures are saved. (Capture an event when the precise
timing is uncertain e.g., a child blowing out birthday
candles.)
Exposure
Bracketing 3
Flash forced off.
Camera takes 3 pictures at a selected interval of 1/3, 2/3, or
1.0 EV. Determine the best exposure level for your
conditions based on your evaluation of 3 pictures.
Exposure
Bracketing 5
Flash forced off.
Camera takes 5 pictures at a selected interval of 1/3, 2/3, or
1.0 EV. Determine the best exposure level for your
conditions based on your evaluation of 5 pictures.
Time Lapse Burst Camera takes specified number of pictures (2–99) at
specified intervals (10 seconds–24 hours in JPEG) and
(1 minute–24 hours in TIFF and RAW).
Drive mode Description