Konica Minolta KD-200Z Digital Camera User Manual


 
19
Preparation
1
q
w
Installing the Strap
q Pass the thin loop through the strap into the
strap holder on the right side of the camera.
If the strap is difficult to pass through, use a
toothpick, etc., to pull out the strap.
w Pass the strap through the thin loop and pull.
Warning:When using the camera with the strap
attached, take care so that it does not
wrap around the neck. On no account
hang the camera on the neck of small
children and infants. Strangulation may
occur as a result if the strap wraps
around the neck.
* When carrying the camera hanging from the
strap, take care so that it is not accidentally
banged.
* When installing the strap, there is a possibility
that the camera could be dropped and dam-
aged. Place the camera on a stable surface
before installing the strap.
e Close the battery/card cover.
* Always turn the main switch to the OFF posi-
tion and make sure the LED is off before in-
serting/removing the SD Memory Card/Multi-
Media Card. When opening the battery/card
cover while the card LED is on, card access is
interrupted and the unit may stop operating
correctly.
* During image recording, the card LED is lit.
While the lamp is on, do not open the battery/
card cover or remove the SD Memory Card/
Multi-Media Card. Interrupting the writing pro-
cess will not only cause the camera to malfunc-
tion but the card may become unusable.