Filter
Top Products
72
Notes
● Do not disconnect the USB cable/AC adapter (optional), or open the battery/card cover
while the card access LED is on. Furthermore, do not format the SD Memory Card or
Multi-Media Card using a PC. Data may become damaged.
● Image files can be copied to a hard disk or other media and deleted as necessary. For
details, refer to the instruction manual operating system in use.
Please note that Konica will not be responsible for any loss resulting from such operations.
● Always back up important data.
● The protect setting set with this camera is equivalent to the read-only attribute of a file.
Please note that, if the attribute of a file is changed using a PC the protect setting set with
the camera will be disabled.
● Images that have been altered or newly saved on an SD Memory Card/Multi-Media Card
using a device other than this camera will not only play back on the camera but may cause
the camera to malfunction when inserted.
● Do not change the file name of image data saved on an SD Memory Card/Multi-Media
Card using a PC or save files other than image data taken by this camera.
q Turn on the power of your PC.
w Connect the camera and PC using the
USB cable supplied.
e Set the main switch on the top of the cam-
era to
, , or .
“PC” will appear on the status LCD.
r An “Undefined Name” icon will appear on
the desktop.
t Double click the “DCIM” folder.
y Double click “100konic” to display the icon
of the image file.
Note:
* The first 3 digits of “100konic” vary depending on
the existing directory of the card.
u Double click the file to display the image.
To save, copy (drag and drop) the file to
the desired location on the Macintosh.
Caution:
Do not disconnect the USB cable/AC adapter (optional),
or open the battery/card cover while the card access
LED is on. Furthermore, do not format the SD Memory
Card or Multi-Media Card using a PC. Data may be-
come damaged.
Transferring images