Kyocera NX Digital Camera User Manual


 
For example, if the ABC Exposure is used at the 18th frame, the exposure
counter is as follows:
1st frame 2nd frame 3rd frame 4th frame
Focus position Standard Over Under (repeated)
Standard
Counter 18 19 20 21
Display Both left and Left flashing Right flashing Both left and
right flashing right flashing
When used with exposure compensation in the ABC Exposure mode, the exposure value
is used as the base value for autobracketing.
Metering is repeated for each photograph, and compensation determined for the metered
value at that time. It is recommended that the AE lock be set before beginning photogra-
phy if autobracketing without the effects of changing brightness is required.
If the compensation range exceeds the compensation limits of the camera, photographs
are taken at the limit of the possible compensation values.
If the main switch is turned “OFF” and “ON” again in the ABC Exposure mode, ABC pho-
tography begins again from the first frame for three frames.
The flash cannot be used in the ABC Exposure mode.
” The compensation sequence may be changed to over-exposure standard expo-
sure under-exposure (page 87).
65
Use this mode to include yourself in the photograph.
Set the drive mode to " ".
For instructions on setting the drive
mode, see page 31.
Adjust the focus, then press the
shutter button.
The selftimer is activated and the shut-
ter is released after 10 seconds. The
selftimer LED on the front of the camera
flashes while the selftimer is operating.
64
Standard UnderOver
Display panel
Set to selftimer mode
Selftimer LED
4. Using the selftimer
When using the selftimer, light entering the viewfinder when the eye is moved away may
interfere with a correct reading of incident light. In such cases, fit the viewfinder shade
adapter to the viewfinder before taking photographs. (page 14)
Use a tripod when taking photographs with the selftimer.
The selftimer cannot be used when the bulb mode is set.
If the shutter button is pressed after the selftimer has been activated, the selftimer time is
reset.
To cancel the selftimer after it has been activated, turn the main switch off.
09-1BC(E)_P050-70 11/15/01 7:28 PM Page 64