Filter
Top Products
103
By extending or contracting the tip of
the case, the NX can be placed in the
case with the Data back D-11 and the
following Carl Zeiss T* lenses mounted
(645 mount lenses require the NAM-1
mount adapter).
102
This adapter allows the use of Contax 645 System lenses with the Contax NX.
Usable with all NX models.
<Mounting the mount adapter and lens>
1. Line up the body mount mark on the mount adapter with the camera’s lens
mark Insert, then turn in the direction of the arrow to mount.
2. Line up the mark on the lens (red) with the lens mount mark on the
adapter , then turn in the direction of the arrow to mount.
<Removing>
1. To remove the lens, slide the mount adapter’s release button , hold it there,
then turn the lens counterclockwise and remove it.
2. To remove the mount adapter, turn it counterclockwise while pressing the
camera’s lens release button.
1
2
1
2
3
4
5
6
5. Contax Mount adapter NAM-1 6. Contax Flexible case C-9
TipCase
Contracted
N mount lens
VS28-80/3.5-5.6
P50/1.4
645 mount lens
P80/2
Extended
VS70-200/3.5-4.5
VS24-85/3.5-4.5
VS17-35/2.8*
(* without hood)
S140/2.8
D55/3.5
C-9
Lenses (with one filter, lens cap, and hood (reversed))
* Use the C-8 flexible case (for the N1) when the MS100/2.8, VS70-300/4.0-5. 6, and 645
mount lens AMP 120/4, D45/2.8, D3.5/3.5 (* without hood) lenses are fitted.
13-1BC(E)_P095-107 11/15/01 7:29 PM Page 102