Kyocera NX Digital Camera User Manual


 
9392
If there seems to be a problem, check the following table before assuming
the camera is malfunctioning.
2. Troubleshooting
Cause
1. Nothing appears
on the display
panel
No battery is
loaded.
Battery is fully
spent.
Battery is loaded
upside-down.
Solution
Insert battery.
Replace the bat-
tery with a new
one.
Insert the battery
properly.
See page
16
16
16
Symptom
2. Battery mark
(“ ”) is flashing
Battery is spent. Replace the bat-
tery with a new
one.
17
3. Exposure counter
flashes “00” when
film is loaded and
camera back is
closed
Film has not been
advanced proper-
ly.
Reload the film. 20
4. Viewfinder display
is not clear
Diopter is not
properly adjusted.
Turn the diopter
adjustment dial to
adjust.
15
5. Shutter cannot be
released
Drive mode is set
to the “selftimer”
mode.
Internal flash is
charging.
Switch to a differ-
ent drive mode.
Wait until charging
is complete (i.e.
” lit) before tak-
ing the photo-
graph.
31
73
Cause
6. Photographs are
blurry
Focus is not prop-
erly adjusted.
Camera is shak-
ing when shutter
button is pressed.
Shutter speed is
slow.
Solution
Adjust the focus
properly.
Press the shutter
button gently so
that the camera
does not shake.
Use a tripod.
See page
38
19, 27
Symptom
8.
Shutter speed or
aperture value
flashes during auto
photography
Subject is either
too bright or too
dark.
Adjust the expo-
sure as described
on page 54.
54
9. Exposure counter
is flashing (other
than “00”)
ABC mode is set. Set ABC compen-
sation back to
“0.0”.
62
10. Metering mark
flashes when
shutter button is
half-pressed
“AE lock on”
selected when
half-pressed.
Set custom func-
tion to “2-0”.
87
7. Exposure com-
pensation mark is
displayed.
Exposure com-
pensation is still
set.
Set the exposure
compensation
back to “0.0”.
Turn the main
switch OFF.
58
58
12-1BC(E)_P090-94 11/15/01 7:29 PM Page 92