81
Shoe stopper
The TLA360’s “mount” is equipped with
a shoe stopper that prevents the flash
from accidentally coming off the camera.
When attaching and removing the flash
from the camera, be sure to line up the
flash’s “mount” mark with the mark on
the shoe lock ring.
Fit the flash to the camera, select
“M” as the exposure mode, and
set the shutter speed to a maximum
of “X125”.
Set the aperture and take the pic-
ture.
Determine the aperture by following the
flash’s operating instructions.
• For non-direct contact flashes requiring
cords, connect the flash to the synchroniza-
tion terminal on the side of the camera.
80
Flash intensity compensation
This is available only in the TTL auto flash photography mode.
Compensation is not possible in other modes.
• The flash intensity can be compensated within the range of -3 EV to +1 EV in 1/3 EV
steps.
• The flash intensity is compensated in conjunction with the camera’s exposure compensa-
tion value. If for example the camera’s exposure compensation is “+1” and the flash’s
compensation is set to “+1”, the flash intensity compensation is “+2EV”.
Press the flash’s “SEL” button.
• The compensation scale appears on the display panel and the “+/-” mark flashes.
Use the flash’s “▲” and “▼” (up and down) buttons to set the compen-
sation scale to the desired value.
Press the “SEL” button again.
The “+/-” mark stops flashing, remaining lit, and the compensation is
set.
• The compensation scale on the flash’s display panel indicates the compensation value for
the flash.
• If the flash’s compensation value is set to “0” (no compensation), the compensation scale
turns off after 8 seconds.
“Auto off” and “auto on” functions
When the flash’s power switch is set to “auto off”, the flash’s power turns
off automatically after approximately 80 seconds. When the camera’s shut-
ter release button is half-pressed, the flash automatically turns on and
charging starts.
These functions help save power when using the flash for long periods of
time.
* The TLA360 is equipped with a variety of other functions as well. Be sure to read the
TLA360’s operating instructions to take advantage of all the flash photography possi-
bilities the TLA360 has to offer.
3. Taking photographs using other flashes with the X
contact
10-1BC(E)_P071-85 11/15/01 7:29 PM Page 80