Filter
Top Products
Taking pictures
Manual focusing
- 105 -
●
You can focus using the [ND/FOCUS] lever even during motion picture recording.
Note, however, that indications such as MF assist and depth of field range are not
displayed.
●
After changing the focal length, i.e. zooming, refocus.
●
The depth of field range displayed by Manual Focus is an approximation. Confirm the
focus setting on the monitor image ([MF Assist] screen).
●
After canceling [Sleep Mode], be sure to refocus.
●
When Manual Focus is used together with AE Lock, it is easier to confirm the focus.
■
Enlarged display (MF assist)
When [MF Assist] in the [Setup] menu is [ON] and you focus manually, an enlarged
display appears.
• By pushing the [ND/FOCUS] lever during an enlarged display, you can set the
magnification to approx. 5x, 10x or 4x (only at the center of the screen).
• Approximately 2 seconds after manually focusing, the display switches to normal.
●
To change the position of an enlarged display
Press [MENU/SET] during the manual focusing operation (while the enlarged
display is displayed)
Use cursor buttons to move the enlarged display
• To return the enlarged display to the center → Press the [DISP] button
Press [MENU/SET]
●
MF assist is not displayed in the Digital Zoom area.
■
1 Shot AF
When [1 Shot AF] is registered in [Fn Button Set], you can press once to activate
Autofocus temporarily and focus on the subject.