Filter
Top Products
Preparations
Inserting and removing the card/the battery
- 18 -
• Set the camera ON/OFF switch to [OFF].
Do not touch the
terminals
Charged battery (check orientation)
Card
(check orientation: terminals face monitor)
Latch
Push the release slider to the
[OPEN] position and open
the card/battery door
Release slider
[OPEN] [LOCK]
Insert battery and card,
making sure that they are
correctly aligned
• Battery: Push it in until it is locked
by the latch.
• Card: Push it down until it clicks into
place.
Close the door and push the
release slider to the [LOCK]
position