Miscellaneous
Q&A Troubleshooting
- 215 -
Miscellaneous
The menu is not displayed in desired language.
●
Change the [Language] setting (→43).
The camera rattles if shaken.
●
This sound is made by the lens movement and is not a fault.
The red lamp turns on when pressing shutter button halfway in dark locations.
●
[AF Assist Lamp] is set to [ON] (→143).
The red lamp does not turn on.
●
[AF Assist Lamp] is set to [OFF].
●
In bright locations, this is unnecessary and therefore correct.
The camera gets warm.
●
The camera may become a little warm during use, but this does not affect its performance or image
quality.
The lens makes a clicking noise.
●
When the subject brightness changes, this may happen and the monitor brightness may also
change, but this is due to aperture settings being made.
(This does not affect recording.)
The time/date display is incorrect.
●
The camera has been left for a long period.
→ Reset the clock (→24).
●
A long time was taken for the settings (the display will be behind by the same lapse of time).
The zooming movement stops momentarily.
●
This can occur during Extended optical zoom operation, but it is not a malfunction.
The file numbers are not recorded in sequence.
●
File numbers are reset when new folders are created (→38).
The file numbers have jumped backwards.
●
The battery was removed/inserted with the camera switched on.
(The numbers may jump backwards if folder/file numbers are not correctly recorded.)