Preparations
Using the [Setup] menu
- 31 -
• For the setting procedures of the menu. (→25)
[LCD Display] / [Viewfinder]
For adjusting the brightness and the color rendition of the monitor. When the display is
switched to an attached external electronic viewfinder (available as accessory (→8)), the
brightness and color rendition of the viewfinder are adjusted.
Press to select the setting item, and then to make
adjustments
Press [MENU/SET]
●
Some subjects may look different from their actual appearance, but the recorded
picture will not be affected.
[LCD Mode]
For enhancing the visibility of the monitor image.
■
Settings
: The display brightness is adjusted automatically depending on the ambient
brightness.
: Increases the monitor image brightness (for outdoor use).
[OFF]
●
This function [ ] is not available in playback mode.
●
[ ] returns to ordinary brightness if there is no operation for 30 seconds when
recording. (Press any button to increase the monitor image brightness again.)
●
Because the picture shown on the monitor is brighter than normal, some subjects may
look different than their actual appearance, but this will not affect the recorded picture.
●
Setting [LCD Mode] reduces the operating time.