Filter
Top Products
3.1 Sub-modes of TTL flash mode
Different flash sub-modes can be set when the meca-
blitz is in TTL mode:
The number of possible sub-modes depends on the SCA
adapter and the given camera:
• TTL-remote with address „Ad 1“ (see Chapter Metz
TTL Remote Mode)
• TTL-remote with address „Ad 2“ (see Chapter Metz
TTL Remote Mode)
• E-TTL flash mode (only with SCA 3102 and a suitable
Canon camera; see operating instructions for the SCA
adapter and the camera).
• E-TTL-HSS flash mode; high-speed synchronisation
(only with SCA 3102 and a suitable Canon camera; see
operating instructions for the SCA adapter and the
camera).
• Matrix-controlled fill-in flash (only with SCA 3402
and a suitable Nikon camera; see operating instruc-
tions for the SCA adapter and the camera).
• 3D multi-sensor fill-in flash (only with SCA 3402
and a suitable Nikon camera; see operating instruc-
tions for the SCA adapter and the camera).
• TTL-HSS flash mode; high-speed synchronisation
(only with SCA 3302 and a suitable Minolta
camera; see operating instructions for the SCA adapter
and the camera).
Setting a sub-mode of TTL flash mode:
• Depress the Mode button repeatedly until TTL flashes
on the display. In the event that TTL no longer flashes,
just press the MODE button once.
• Turn the setting disk and select the required sub-
mode.
• Push the setting disk in the direction of the arrow for
storage.The selected sub-mode will be automatically
stored after 5 seconds if the setting disk is not pres-
sed.The TTL icon will stop flashing after storage.
22
Fig.4c / Figura 4c / Grabado 4c
Fig.4a / Figura 4a / Grabado 4a
Fig.4b / Figura 4b / Grabado 4b
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 22