Filter
Top Products
• Turn the setting disk until „AutoZoom“ reappears on
the display.
• Press the setting disk in the direction of the arrow to
store the setting.The setting is automatically stored
after 5 seconds if the setting disk is not pressed.The
arrow symbol ceases to flash.
The camera on to which the flash unit is moun-
ted must be switched on!
12.10
m-ft changeover
• Turn off the mecablitz with its main switch.
•Press the button Select and simultaneously slide the
main switch from OFF to ON.
13. Wide-angle diffuser
Pull the wide-angle diffuser out from underneath the
main reflector until the stop point is reached and then
release.The main reflector automatically moves to 20
mm zoom position and the wide-angle diffuser automati-
cally folds upwards.The distances and the zoom value
are corrected on the LC display.
To insert the wide-angle diffuser turn it 90° down,and
push in entirely.
Modes that operate with measuring pre-flash or high-
speed synchronisation (HSS) must not be set when wor-
king with wide-angle diffuser or reflector attachments
such as colour filters, neutral density filter,Mecabounce,
etc.
☞
Special functions
Funzioni speciali
Funciones especiales
80
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 80