Filter
Top Products
Monitor Your Network
43
NMS300 Network Management System Application
View Wireless Device Information Only
You can easily monitor your wireless network by displaying wireless controllers, wireless
access point (APs), wireless management systems, and active wireless clients.
Because of the nature of controller-managed APs, the application can provide only limited
information for controller-managed APs, compared to standalone APs.
Note: For information about viewing wireless clients of wireless controllers,
APs, and management systems, see View Wireless Client
Information on page 45.
View Wireless Controller Information Only
You can display only the wireless controllers that the application manages.
To view wireless controller information:
1. Log in to the application.
For more information, see Log In to the Application on page 12.
2. Select WIRELESS > CONTROLLERS.
3. To add columns to or remove them from the Devices table, right-click the table heading
anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Status, Device Name, IP Address,
Hostname, Managed By, MAC Address, Location, Device Model, V
endor, Device Type,
Last Update Time, Hardware Version, Firmware Version, Configuration Version, Serial
Number, Contact, and Discover Time.
4. To filter the devices that are listed, click the Show Filter button.
You can filter the devices by criteria such as type, name, IP address, location, vendor
,
model, and status.
To hide the filter, click the Hide Filter button.