Filter
Top Products
21
Using Camera Control Pro Appendices
Return to fi rst page
Overview
Camera Control Pro 2
1
Turn the camera off and use the interface cable to connect the camera to the
computer as described in the camera manual. If you are using a D1-series
camera, choose “PC” as the operating mode. If you are using a D100, choose
P, S, A, or M mode. Users of D3, D2-series, D300, and D200 cameras can select
any mode other than M-
UP (mirror up). Other cameras can be connected in
any shooting mode.
Starting and Exiting Camera Control Pro 1/7
LANs
See the wireless transmitter user’s manual for information on controlling cameras connected to lo-
cal area networks (LANs) using WT-2, WT-3, or WT-4 wireless transmitters.
USB
When using the D100 under Windows 2000, log in to an administrator account and set the camera
USB option to Mass Storage; otherwise, set the camera USB option to PTP. When using other
cameras equipped with a USB interface, set the camera USB option to PTP or MTP/PTP. D1-series
cameras do not support USB.
Starting Camera Control Pro