Filter
Top Products
Overview Appendices
Return to fi rst page
37
Using Camera Control Pro
Camera Control Pro 2
4
After adjusting options as described in Step 3, click OK to exit the dialog
and apply settings to sub se quent photographs. Note that if On or Auto-
matic (the default setting) is selected for the auto image rotation option in
the camera setup menu, D3, D2-series, D300, D200, D80, D70-series, D50, and
D40-series cameras will detect camera orientation and automatically embed
this information in photographs (note that in continuous mode, the orienta-
tion for the fi rst image in each burst applies to all images in the series, even
if camera orientation is changed during shooting). If Off is selected, camera
orientation will not be recorded. To add information on picture orientation
during download, open the Image menu and selecting Rotate all down-
loaded images by 90 degrees CCW to mark pictures as being rotated 90 °
to the right, or Rotate all downloaded images by 90 degrees CW to
mark pictures as being rotated 90 ° to the left.
Image Authentication
D3 D2Xs D300 D2X
*
D2Hs
*
D200
*
The “Rotate all downloaded images…” options do not apply to photographs taken with Image Au-
thentication on. Image authentication information is not embedded in TIFF photographs when cap-
turing images using the Camera Control Pro.
* Image Authentication supported from camera fi rmware version 2.00.
Capturing Photographs to Disk 5/6