Filter
Top Products
E61
The Setup Menu
Reference Section
HDMI
Adjust settings for connection to a TV.
Choose an image resolution for HDMI output from Auto (default setting), 480p,
720p, or 1080i. When Auto is selected, the option best suited to the high-
definition TV to which the camera is connected is automatically selected from
480p, 720p, or 1080i.
C HDMI
“HDMI” is the abbreviation for High-Definition Multimedia Interface and is one type of multimedia
interface.
Blink Warning
Specify whether or not the camera detects human subjects that blink when
shooting with face detection (A58) in the following modes:
• G (easy auto) mode (A30) or A (auto) mode (A31).
• Portrait (A34) or Night portrait (A35) is selected for the scene mode.
B Note About Blink Warning
The blink warning does not function when a setting other than Single is used for the continuous
setting.
Display the shooting or playback screen M Press the d button M Tap z Set up M
HDMI
Display the shooting or playback screen M Press the d button M Tap z Set up M
Blink warning
Option Description
On
When the camera detects that one or more human subjects
may have blinked in an image taken using face detection, the
blink warning screen is displayed in the monitor.
The face of the human subject that may have blinked when
the shutter was released is framed by a yellow border. Should
this occur, check the image and determine whether or not
another image should be taken.
See “Operating the Blink Warning Screen” (E62) for more
information.
Off (default setting) Blink warning is not enabled.