Nikon 26494 Digital Camera User Manual


 
Technical Notes
161
Notes About the Monitor
Monitors and electronic viewfinders are constructed with extremely high precision;
at least 99.99% of pixels are effective, with no more than 0.01% being missing or
defective. Hence while these displays may contain pixels that are always lit (white,
red, blue, or green) or always off (black), this is not a malfunction and has no effect
on images recorded with the device.
Due to the general characteristics of OLED monitors, prolonged or repeated
display of the same screen or image may result in screen burn. Screen burn can be
recognized by decreased brightness in portions of the monitor or mottled display.
In some cases, screen burn may become permanent. However, images are in no
way affected by screen burn.
To prevent screen burn, do not set monitor brightness higher than necessary and
do not display the same screen or image for an extended period of time.
Images in the monitor may be difficult to see under bright lighting.
Do not apply pressure to the monitor, as this could cause damage or malfunction.
Should the monitor break, care should be taken to avoid injury caused by broken
glass.
The Battery
Precautions for Use
Note that the battery may become hot after use.
Do not use the battery at ambient temperatures below -10°C (-14°F) or above 40°C
(104°F) as this could cause damage or malfunction.
If you notice any abnormalities such as excessive heat, smoke, or an unusual smell
coming from the battery, immediately discontinue use and consult your retailer or
Nikon-authorized service representative.
After removing the battery from the camera or optional battery charger, put the
battery in a plastic bag, etc. in order to insulate it.
Charging the Battery
Check the battery level before using the camera and replace or charge the battery if
necessary.
Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
A high battery temperature may prevent the battery from charging properly or
completely, and may reduce battery performance. Note that the battery may
become hot after use; wait for the battery to cool before charging.
When charging the battery inserted into this camera using the Charging AC
Adapter or a computer, the battery is not charged at battery temperatures below
0°C (32°F) or above 45°C (113°F).
Do not continue charging once the battery is fully charged as this will result in
reduced battery performance.
The battery temperature may increase during charging. However, this is not a
malfunction.