Filter
Top Products
20
Basic Shooting and Playback Operations
The operations described below can be performed by shaking or tilting the camera.
Displaying the Previous or Next Image in Full-
frame Playback Mode
In full-frame playback mode, shake the camera up/
down to display the next image, or forward/
backward to display the previous image (when
Playback action control in the setup menu
(A78) is set to On).
• Make sure to hold the camera firmly with the
camera strap around your hand, and use your wrist
to shake the camera as shown in the illustration.
Using Action Menu
Press the V (action) button
to display the action menu.
• Shake the camera to
select an option listed
below, and press the V
button to perform the
operation.
While the action menu is displayed, operations can be performed using only
the V button, shutter-release button, power switch, or Z button.
Adjusting the Map Display
• You can scroll the displayed map by tilting the camera while pressing the V
button.
• You can zoom in on the displayed map by shaking the camera once, and
zoom out by shaking it twice (when Map actions in the setup menu is set
to On).
Action Control
Option Description
Shooting mode
selection
Select a shooting mode (only restricted to some
shooting modes).
q Start movie
recording
Press the V button to record/end a movie.
K Quick playback Display an image in full-frame playback mode.
U Current position
Display the current position on a map (only when the
location data has been successfully calculated (A132)).
f Exit Exit the action menu.
Confirm
Scene auto selector
Action menu