Nikon 26494 Digital Camera User Manual


 
11
Preparing for Shooting
6 Set the date and time, and press
the k button.
Use JK to select a field and then use HI
to set the date and time.
Select the minute field and press the k
button to confirm the setting.
7 When the confirmation dialog is displayed, use HI to
select Yes and press the k button.
8 Read the message about the
waterproof function, and press K.
There are seven message screens.
Press the k button after confirming the
last message.
The shooting screen is displayed, and you
can take pictures in scene auto selector
mode.
Battery level indicator
b: The battery level is high.
B: The battery level is low.
Number of exposures remaining
C is displayed when no memory card is inserted in the camera, and images
are saved in the internal memory.
C Changing the Language or the Date and Time Setting
You can change these settings using the Language and Time zone and date
settings in the zsetup menu (A78).
You can enable or disable daylight saving time in the z setup menu by selecting
Time zone and date followed by Time zone. Press the multi selector K and then
H to enable daylight saving time and move the clock forward one hour, or I to
disable daylight saving time and move the clock back one hour.
C The Clock Battery
The camera’s clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or
when the camera is connected to an optional AC adapter, and it can run the clock
for several days after about 10 hours of charging.
If the camera’s backup battery becomes exhausted, the date and time setting
screen is displayed when the camera is turned on. Set the date and time again
(A10).
Date and time
D
M
Y
2015
01
01
00
00
h m
Edit
25
m
0s
25
m
0s
880
880
40
10
0
-10
30
20
1010hPa
1010hPa
1010hPa
15m
15m
15m
Battery level indicator
Number of exposures
remaining