Nikon A Black Camera Lens User Manual


 
109
J
Sharing Custom Picture Controls
Custom Picture Controls created using the Picture Control Utility
available with ViewNX 2 or optional software such as Capture NX 2
can be copied to a memory card and loaded into the camera, or
custom Picture Controls created with the camera can be copied to
the memory card to be used in compatible cameras and software
and then deleted when no longer needed.
To copy custom Picture Controls to or
from the memory card, or to delete
custom Picture Controls from the
memory card, highlight Load/save
in the Manage Picture Control
menu and press 2.
The following
options will be displayed:
Copy to camera: Copy custom Picture Controls from the memory
card to custom Picture Controls C-1 through C-9 on the camera
and name them as desired.
Delete from card: Delete selected
custom Picture Controls from the
memory card.
The confirmation
dialog shown at right will be
displayed before a Picture Control
is deleted; to delete the selected
Picture Control, highlight Ye s and
press J.
Copy to card: Copy a custom Picture Control (C-1 through C-9) from
the camera to a selected destination (1 through 99) on the
memory card.
A Saving Custom Picture Controls
Up to 99 custom Picture Controls can be stored on the memory card at
any one time.
The memory card can only be used to store user-created
custom Picture Controls.
The preset Picture Controls supplied with the
camera can not be copied to the memory card, renamed, or deleted.