n
226
n
Technical Notes
Read this chapter for information on compatible accessories,
cleaning and storing the camera, and what to do if an error
message is displayed or you encounter problems using the camera.
Compatible optional flash units can be attached directly to the
camera accessory shoe as described below.
The accessory shoe is
equipped with a safety lock for flash units with a locking pin.
1 Remove the accessory shoe cover.
2 Mount the flash unit on the
accessory shoe.
See the manual provided with the flash
unit for details.
The built-in flash will not
fire when an optional flash unit is
attached.
Optional Flash Units
(Speedlights)
D Use Only Nikon Flash Accessories
Use only Nikon flash units.
Negative voltages or voltages over 250 V
applied to the accessory shoe could not only prevent normal operation,
but damage the sync circuitry of the camera or flash.