Filter
Top Products
12
Note on installation
1. Turn off the
power
switches
for
the equipment. (The
LS
-
10
is not provided with a
power
switch. Always
turn off the switch on the computer.)
2. Turn off the
power
switches
for
all the devices
(printer
, display) connected to the computer.
3. Move the key to the unlock position if the computer
has a key-lock mechanism.
4. Unplug all the cables, including the
power
cords.
5.
Remove the cover of computer as described in the
manual.
6. Remove the
cover
of the bay as described in the
manual.
Warnlngl
Electro.taUc discharge
will damage the scanner If
you touch the scanner'. connector pin
•.
Do not
touch the pin
•.