Filter
Top Products
[a]
Fig. 4.13 Aligning the strip film holder with the
scanner's film slot
Allgnement
du
porte-film sur Ie logement
du
scanner
Ausrichten des Fllmstrelfenhalters auf den
Fllmschlltz des Scanners
[d)
Fig. 4.14 The strip film holder ready for scanning
Le
porte-film pret pour une numerlsation
Fllmstreifenhalter
In
Abtastposltlon
68
Loading the holder into the scanner
The strip film
holder
is inserted into the scanner by
holding the back end of the strip film
holder
and pushing
the
front
end into the film
slot
of the scanner. The
strip
film holder should be pushed in gently until the first stop
is felt.
It is best to align the
strip
film holder before inserting it
so the holder is in the same place as the film
slot
on the
scanner and the holder goes straight into the scanner.
This is no different than pushing a disk into a disk
drive
or
a video tape into a video tape player. This is
illustrated in Figure 4.13.
[a] Scanner
[b] Strip film
holder
When ready to scan, the strip film
holder
extends out of
the
front
of the scanner as shown in Figure 4.
14
.
[c] Scanner
[d] Strip film
holder
Ejecting the holder
The strip film
holder
is ejected the same way a
slide
is
ejected.
The software eject command accomplishes this task.
Unlike a
slide
, it is possible to
simply
remove the
strip
film
holder
by hand when the
scanner
is not in a
working status since it always extends out the front of
the scanner.