Filter
Top Products
3
Gently close t
he
camera back
until
the camera back snaps
closed.
-~
:(,5
F5.6
@
BE
u
3[m
J
2)
• The film automatically advances
to
final frame with blinking 0 , 0 _ , 0
__
, 0
___
as
indicated
in
LCD panel.
• When the film has completed set up, a shutter sound is let out but no picture has
been taken.
• LCD Panel indicates number of exposures left on film.
• Film rewinds one frame at a time as photos are taken.
• When E appears
in
the LCD panel, film is not properly installed. Open the camera
back again and reload film by aligning the film leader
to
the red index mark.
• When
Err
and E
in
the LCD panel and
Err
in
viewfinder blink, film
is
not
correctly advanced. Open the camera back again and reload film.
• Pictures taken
on
frames beyond the indicated number of the exposures for the
film roll may be discarded
in
the process of developing.
OX-coded
film
With OX-coded film, film speed will be set
automatically between ISO
25 to I
SO
5000.
Film speed is set
to
ISO 100 with non-OX-
coded film.
Check
points
OX-coded film
~
ISO
(film
speed)
~
~
j6
I);
DX
mark
• Avoid direct sunlight when changing film outdoors.
•
You
can check the number
of
available exposures
on
the film roll and film speed
through the film confirmation window.
• Infrared films cannot be used with this camera since
an
infrared sensor is used for
the detection of the film frame position.
21