Filter
Top Products
176
Chapter 10
Connecting directly to a computer by
cable (Cont.)
3
Connect the end of the USB cable marked A to the USB connector
on the personal computer.
4
Connect the end of the USB cable marked B to the USB connector
on the camera.
5
Set the mode dial to .
● The computer recognizes the camera as a new device, then installs the
USB driver. (The next time you connect, the message below will not
appear. The computer will recognize the camera automatically.)
● When using Windows 2000 Professional/Me:
The USB driver will be automatically installed. Click on the “OK” button
when a message appears saying that the installation is complete. The
camera is displayed as “Removable Disk” in either “My Computer” or
“Explorer”.
● When using Windows 98/98SE:
A window appears saying that the computer has started installing the
USB driver. Click the “Cancel” button to close the window, turn off the
camera and remove the USB cable from the camera. Then install the
USB driver from the software CD (provided) as instructed in the
provided “Software Installation Guide”.
● When using Mac OS 9.0 – 9.1:
The computer recognizes the camera automatically and an “Untitled”
icon appears on the Desktop.
6
Following “Transferring images to a
computer — Downloading” (P. 177),
copy or move an image file on the
personal computer.