Filter
Top Products
190
Chapter 12
Picture rotate, Picture protect, Single-frame erase, All-frame erase,
Print reserve and Card formatting cannot be performed.
1 Awrite-protect seal is
affixed to the
SmartMedia card.
1 Use the card after peeling
off the seal. (Do not reuse
the write protect seal.)
P. 28
Troubleshooting (Cont.)
POSSIBLE CAUSES
CORRECTIVE ACTION
REF. PAGE
Pictures you have already taken do not appear on the monitor.
1 The camera is in the
shooting mode.
2 There is no picture on
the SmartMedia card.
3 There is a problem with
the card.
1 Set the mode dial to .
2 NO PICTURE appears on the
monitor. Record pictures.
3 See the error code chart.
P. 130
P. 38, 39,
197
P. 196
1 The diopter is not
adjusted properly.
1 Adjust the diopter again.
P. 35
1 The brightness is not
adjusted properly.
2 The monitor is exposed
to direct sunlight.
1 Adjust the brightness.
2 Block the sunlight or move
out of the sunlight.
P. 83
The monitor is not clear.
The viewfinder display is not clear.
The flash does not fire.
5 Panorama shooting is
performed.
6 FUNCTION is set to
BLACK/WHITE BOARD.
5 Set PANORAMA to OFF in
the menus.
6 Set FUNCTION to OFF in
the menus.
P. 111
P. 109