Filter
Top Products
● If the camera stops working
TTo save battery power, the camera automatically enters the Sleep
mode after about 3 minutes of non-operation. The camera activates
again as soon as you touch any control or button such as the zoom
lever and mode dial.
1
Press the tabs on the lens cap to remove it.
2
Set the mode dial to S-Prg, P, A/S/M/ or .
● The camera turns on.
● The lens extends when the mode dial is not set to .
3
Set the mode dial to OFF.
● The camera turns off.
30
Power on/off
Chapter 1
Lens cap
Mode dial
Card cover
TIPS
● When there is insufficient space remaining on the card, the camera beeps
and CARD FULL appears on the monitor. If this happens, replace the card
with a new/storable card or erase unwanted pictures on the existing card to
make space.
● The number of storable pictures may not be reduced every time a picture is
taken, or increased when a picture is erased. The amount of data varies
depending on the subject of the picture.