Filter
Top Products
114
Sequential shooting
6
Advanced shooting
2
Press to select
±
±±
±
0.3,
±
±±
±
0.7 or
±
±±
±
1.0, then press .
3
Press to select x3 or x5,
then press .
• In some combinations of picture size and
record mode, only x3 is available.
• Press repeatedly until menu
disappears.
4
Take the picture.
Press the shutter button fully and keep it pressed to shoot the preset
number of pictures. You can stop shooting at any time by releasing the
shutter button.
• Sequential shooting (
,
,
, BKT) is not possible
in the following situations:
- When the record mode is set to TIFF.
- When NOISE REDUCTION is set to ON.
• and are not available when the record mode is set to
RAW.
• In sequential shooting mode ( , , , BKT), the
main flash does not fire. The external flash does not fire in BKT
mode.
• If there is not enough space available on the card for the number of
frames you have set during auto bracketing, you cannot continue
shooting.
• If self-timer shooting is attempted when the still picture shooting
mode is set to sequential shooting, the camera shoots 5 frames
automatically.
• If the ISO is set to over 200, noise may appear under some shooting
conditions.
• If the battery power is low and the battery check blinks during
sequential shooting, shooting stops and the camera starts saving
the pictures you have taken. Whether or not all of the shots are
saved depends on how much battery power remains.
BKt
GO
SELECt
CANCEL
Note