Filter
Top Products
159
Editing movies
8
Playback
4
Select the first frame of the index.
• Press to play back the movie
until the picture that you want as the first
frame is displayed in the green frame,
then press .
5
Select the last frame of the index.
• As in Step 4, press to play
back the movie until the picture that you
want as the last frame is displayed in the
green frame, then press .
6
Press to select OK, then
press .
• The 9 frames extracted from the movie
appear as an index display, then the
camera returns to the playback mode. The
index is stored as a new picture.
• If you want to select different frames,
select RESET and press and repeat
the procedure from Step 4.
• To quit the index function, select CANCEL and press .
TIPS
• The index is stored as a still picture in a different record mode from
the original movie.
• The interval between the frames that are automatically picked out
varies depending on the length of the movie.
• An index consists of 9 frames.
• You cannot edit movies stored on a write-protected card.
• You cannot create an index if there is insufficient memory space on the card.
Record mode when the
movie was shot
Record mode when stored as an index
HQ SQ1 (1024 × 768 pixels: HIGH)
SQ SQ2 (640 × 480 pixels: HIGH)
OK
OK
GO
SELECt
OK
RESEt
INDEX
CANCEL
When there are two types of card in the camera, the card selection screen appears
after step 5. Use the arrow pad to select the card and press .
When there is insufficient card memory, the display returns to the setting screen.
Note