Filter
Top Products
48
2
Shooting and playback basics
Recording movies
Even if the distance between the camera and the subject changes while you
are recording a movie, the FULLTIME AF is set to on to maintain the correct
focus and exposure (factory default setting).
1
Set the mode dial to and turn
the camera on.
“Power on/off” (P.31)
• The monitor turns on and the available
recording time on the card that you are
using is displayed.
2
Decide the composition while
looking at the image on the
monitor.
3
Press the shutter button fully to
start recording.
• The orange lamp on the right of the
viewfinder lights.
• During movie recording, lights red.
4
Press the shutter button again to stop recording.
• The card access lamp blinks while the movie is stored on the card.
• When the remaining recording time has been used up, recording stops
automatically.
• When there is space in the card memory, the remaining recording time
is displayed, and the camera is ready to shoot.
Mode dial
Mode dial
Power switch
Shutter button
Seconds remaining