Filter
Top Products
20
1
Getting started
1 Getting started
Attaching the strap
1
Pass the lens cap string through
the hole in the lens cap, then
pass the other end through the
loop and pull tight.
2
Pull the ends of the strap out of
the stopper and ring.
3
Thread one end of the strap
through the string loop
(attached to the lens cap in step
1). Then thread it through the
strap eyelet on the camera.
4
Thread the end of the strap
back through the ring and
stopper as indicated by the
arrows. Adjust the strap to the
desired length.
5
Pull the strap through the
stopper ( ) to make sure it is
fastened securely.
6
Attach the strap to the other
eyelet following steps 3 to 5.
• Be careful with the strap when you carry the camera, as it can easily
catch on stray objects, causing injury or damage.
• Attach the strap correctly as shown above so that the camera does not
fall off. If the strap is attached incorrectly and the camera falls off,
Olympus is not responsible for any damages.
Stopper
Ring
Strap eyelet
Note