Filter
Top Products
22
Loading the batteries
1
Getting started
4
Insert the batteries, making sure that they are correctly
oriented as shown in the illustration.
5
Close the battery compartment
cover, then press it down and
slide it in the direction shown .
• Press the center of the cover, as it may
be difficult to close properly by pressing
the edge.
• Make sure the cover is closed securely.
6
Slide the battery compartment
lock from to .
• If the camera is left for about 1 hour with the batteries removed,
some of the internal settings may revert to the factory default
settings.
Battery
alignment
The correct way to insert the AA batteries
is indicated on the bottom of the camera.
When using CR-V3 lithium
battery packs
When using AA (R6) batteries
Note
The amount of power consumed varies considerably depending on the
operations performed on the digital camera. If you use exhausted
batteries or alkaline batteries, the camera may turn off without displaying
the battery level warning (P.18).
Precautions when using batteries