Filter
Top Products
156
Editing still pictures
8
Playback
7
Press to select OK, then
press .
• The busy bar is displayed during resizing.
After the image is saved, the camera
returns to the mode menu.
• The trimmed picture is stored as a separate
picture from the original.
• If you want to trim the picture again, select RESET and press and
repeat the procedure from Step 5.
• To quit the trimming function, select CANCEL and press .
• Trimming is not possible in the following cases.
Movies, when there is insufficient memory space on the card, or
when the picture was taken with the record mode set to
ENLARGE SIZE.
• It may not be possible to trim pictures taken with another camera.
• If pictures recorded in 3:2 are trimmed, the image proportions are
changed to the standard 4:3 aspect ratio.
• If a trimmed picture is printed out, it may appear grainy.
RAW editing
3
Select RAW DATA EDIT, then
press .
4
Press to select the item you
want to set, then press .
GO
SELECt
OK
RESEt
CANCEL
When there are two types of card in the camera, the card selection
screen appears after step 6. Use the arrow pad to select the card and
press .
When there is insufficient card memory, the display returns to the
setting screen.
Note
HQ
HQ
WB
SHARPNESS
CONtRASt
AUtO
AUtO
SAtURAtION
RAW DAtA EDIt